2

I have a worker on slush's pool, I have my BFGminer running (Pool 0 is hiding block contents unsure if that's important) and my Antminer S7, but I can't seem to get it to see it as a device. It ask for a target which is a serial port to probe for mining devices but I'm unsure what it's asking.

Helidor
  • 21
  • 2

2 Answers2

1

The Antminer S7 runs standalone. It has a micro-controler that runs CGminer, and a web interface where you can point it to any pool you want. You just need to figure out the IP address of the miner, then type it in a web browser. The default password is root/root, if my memory serves me well.

In any case, you should read the manual.

Charles Bouillaguet
  • 337
  • 1
  • 7
1

You can download IPreporter from Bitmain's support site. Run IPreporter software, now go to the miner and on the back side of the miner next the LAN port there is a button push is for 1-2 seconds. Now you should have the IP address. Paste it in a web browser and put your pwd in. And you have access.

Andy Jacksson
  • 11
  • 2